welding front part 5

I welded a part of handle. Before that, I finished welding cage.

 The front tire is kept out from Rider's legs. and it supports to stand up and get off from the bike.

 I gave two ideas about the ways to attach handle from Fuuden's master. Then I got new idea by mixed them and mine. Ordinally the diameter of the handle is 22.2 mm.
Then I cut 28.8 mm's for grabing handle.

 And I cut rectangular 25 x 12 mm. It works to support the pipe to grab handle.

 They were cut almost at the centers.

 Then they were welded like this.

 Then it was welded to the front part. to attach the handle, we use U bolts.

The rubber sheet which thickness is 3 mm will be wind around the handle. In that case the diameter of outside of the handle and the diameter of inside of the attaching part will be matched.

Fini.