At first I made steering pivot.
I should drill as next step. I couldn't notice that.
The rectangular tubes are bent along with my drawing then tacked.
Welded. It need cleaning flux.
Cleaned.
I think my welding skill became a little good at flat part.
Today's last shot.
24 hours of working time passed.
I should drill as next step. I couldn't notice that.
The rectangular tubes are bent along with my drawing then tacked.
Welded. It need cleaning flux.
Cleaned.
I think my welding skill became a little good at flat part.
Today's last shot.
24 hours of working time passed.
