I started cutting steering plate.
Then main tube was cut.
They are combined like this.
They were tacked and welded.
The edges of the main tube are bent to cover steering plate and welded.
after that, they were cleaned.
The main frame are bent.
But in this time, I cut it and combined them.
Then, tacking welding.
This zig zag frame and rear fork were welded. I used this connecting way like wood.
The edge of the main frame was cut like when the steering plate was welded.
The edges of rear fork were covered.
Some dust is left inside of the tube. How can I avoid this ?
That's last shot.
Then main tube was cut.
They are combined like this.
They were tacked and welded.
The edges of the main tube are bent to cover steering plate and welded.
after that, they were cleaned.The main frame are bent.
But in this time, I cut it and combined them.
Then, tacking welding.
This zig zag frame and rear fork were welded. I used this connecting way like wood.
The edge of the main frame was cut like when the steering plate was welded.
The edges of rear fork were covered.
Some dust is left inside of the tube. How can I avoid this ?
That's last shot.
